What do you need help with?

Go to this address http://192.168.8.1/

From the menu choose Settings → open Profile Management → click on New Profile**

Add a profile name and write static.emt.ee as APN

To apply changes click Save

From the menue find Settings and Wifi/DHCP

Wifi Basic Settings pages has 2 wifi networks active, 2,4GHz and 5GHz.

To save click Apply

From the menu choose Settings and Wifi/DHCP

Under Wifi Advanced Settings u can change the channel - Channel

Open Settings and then Virtual Server, click Add

Add port forwarding information and click Apply:

Settings → Dial-up → Network Settings choose mode and click Apply.

To use the Internet abroad, roaming must be enabled in the router settings. By default, roaming is disabled in the router settings.

From the menu, go to Settings → Dial-up → Mobile Connection → change to "Enable" and click "Apply" to confirm.

In the Estonian menu: Seaded → Sissehelistamine → Mobiilne andmesiderändlus

The roaming service must also be activated for the number. It can be activated in the self-service portal, view guide

In order to select an external antenna, go to the System subsection of the menu in the user interface, and there to the Antenna Settings subsection. On the page that opens on the right select External and click on the Apply button.

Press and hold the Reset button for about 5-7 seconds (until the lights on the device go out for a moment).

Then release the RESET button - the router will start restoring the initial settings.

After restoring the factory settings, the router has the original settings (wifi name and password are located on the back)